Issue 3, 2019

Efficient removal of both antimonite (Sb(iii)) and antimonate (Sb(v)) from environmental water using titanate nanotubes and nanoparticles

Abstract

Increasing attention has been focused on antimony (Sb) pollution and remediation in aquatic ecosystems, where efficient removal technologies for Sb compounds, particularly Sb(III) and Sb(V), from environmental water are urgently needed. Thus, herein, a mesoporous material, titanate nanotubes (3 nm, TiO2 NTs) with a large surface area was synthesized and used to remove both Sb(III) and Sb(V) from various natural waters. Furthermore, it was characterized via adsorption isotherm and kinetic experiments, and its mechanisms were investigated using various techniques, including Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD) and density functional theory (DFT) models. The results show that the maximum amounts of Sb(III) and Sb(V) adsorbed on the TiO2 NTs (250.0 mg g−1 and 56.3 mg g−1) were due to electrostatic interactions and complexation, which were 20- and 7-fold greater than that on TiO2 NPs of 12.0 mg g−1 and 8.6 mg g−1, respectively. The removal efficiencies for the TiO2 NMs using tap water, natural surface water and wastewater were satisfactory, which were nearly 100% for Sb(III) and 100%, 98% and 56%, respectively, for Sb(V) with 5 mg/50 mL TiO2 and spiked with Sb (200 μg L−1). The TiO2 NTs showed excellent reusability with 0.5 mol L−1 sodium hydroxide as a desorbing agent. The FTIR and XPS results suggested that the hydroxyl groups play a significant role in the adsorption processes. Based on DFT calculations, it was found that Sb(III) preferred to form O–Ti bonds, Sb(V) formed O–Ti bonds on the {101} facet of the anatase TiO2 NPs, and Sb(V) preferred to adsorb on the {001} facet. However, for Sb(III), there was no preference between the {101} and {001} facets. This study demonstrates that TiO2 NTs are promising, easily synthesizable and environmentally friendly adsorbents for both Sb(III) and Sb(V), and can be potentially applied in wastewater treatment.

Graphical abstract: Efficient removal of both antimonite (Sb(iii)) and antimonate (Sb(v)) from environmental water using titanate nanotubes and nanoparticles

Supplementary files

Article information

Article type
Paper
Submitted
09 Aug 2018
Accepted
13 Jan 2019
First published
15 Jan 2019

Environ. Sci.: Nano, 2019,6, 834-850

Efficient removal of both antimonite (Sb(III)) and antimonate (Sb(V)) from environmental water using titanate nanotubes and nanoparticles

T. Zhao, Z. Tang, X. Zhao, H. Zhang, J. Wang, F. Wu, J. P. Giesy and J. Shi, Environ. Sci.: Nano, 2019, 6, 834 DOI: 10.1039/C8EN00869H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements