Issue 10, 2018

Calibrating NIST SRM 683 as a new international reference standard for Zn isotopes

Abstract

Zinc isotopes have been increasingly applied in cosmochemistry, geochemistry, and environmental sciences. A direct comparison of data obtained in different laboratories is a prerequisite to these applications. The JMC 3-0749L Zn solution is the international primary standard for Zn isotopes, but it is nearly exhausted and no longer available. Thus, it is necessary to calibrate a new reference material for Zn isotope analysis. Herein, we measured the Zn isotope composition and examined the homogeneity of the Standard Reference Material 683 of the National Institute of Standard and Technology (NIST SRM 683, a pure Zn metal nugget of 140 grams) with the double-spike method using Multiple Collector-Inductively Coupled Plasma-Mass Spectrometry (MC-ICP-MS). Five metal nuggets of NIST SRM 683 were intensively sampled by micro-drilling, and they exhibited δ66ZnJMC-Lyon of 0.13 ± 0.06‰ (here and throughout the text, errors are given as two-standard deviation (2SD), N = 32), 0.13 ± 0.04‰ (N = 31), 0.13 ± 0.04‰ (N = 30), 0.13 ± 0.04‰ (N = 30), and 0.12 ± 0.06‰ (N = 30). These values were identical to those of two Zn metal nuggets (0.11 ± 0.02‰ and 0.12 ± 0.02‰) previously reported, which confirmed the accuracy of our data and the isotopic homogeneity of NIST SRM 683. We also digested one whole nugget with δ66ZnJMC-Lyon of 0.12‰ ± 0.04‰ (N = 44), which was identical to that of the drilling samples. Our results indicated that within our analytical precision of 0.04, NIST SRM 683 is homogeneous in Zn isotopic compositions with δ66ZnJMC-Lyon of 0.12 ± 0.04‰ (N = 295) at the 95% confidence level, which is close to the Zn isotope value of bulk silicate Earth. Therefore, we believe that NIST SRM 683 is a good candidate for the next primary standard for Zn isotopes.

Graphical abstract: Calibrating NIST SRM 683 as a new international reference standard for Zn isotopes

Article information

Article type
Technical Note
Submitted
25 Jul 2018
Accepted
22 Aug 2018
First published
22 Aug 2018

J. Anal. At. Spectrom., 2018,33, 1777-1783

Calibrating NIST SRM 683 as a new international reference standard for Zn isotopes

Y. Yang, X. Zhang, S. Liu, T. Zhou, H. Fan, H. Yu, W. Cheng and F. Huang, J. Anal. At. Spectrom., 2018, 33, 1777 DOI: 10.1039/C8JA00249E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements