Issue 24, 2018

Enhancement of photoluminescence and hole mobility in 1- to 5-layer InSe due to the top valence-band inversion: strain effect

Abstract

Recently, two-dimensional (2D) few-layer InSe nanosheets have become one of the most interesting materials due to their excellent electron transport, wide bandgap tunability and good metal contact. However, their low photoluminescence (PL) efficiency and hole mobility seriously restrict their application in 2D InSe-based nano-devices. Here, by exerting a suitable compressive strain, a remarkable modification for the electronic structure and the optical and transport properties of 1- to 5-layer InSe has been confirmed by powerful GW-BSE calculations. Both top valence band inversion and indirect-to-direct bandgap transition are induced; the light polarization is reversed from E||c to Ec; and the PL intensity and hole mobility are enhanced greatly. Surprisingly, under 6% compressive strain, the light emission of monolayer InSe with Ec is allowed at 2.58 eV, which has never been observed previously. Meanwhile, for the 2D few-layer InSe, the PL with Ec polarization increases over 10 times in intensity and has a blue-shift at about 0.6–0.7 eV, and the hole mobility increases two orders of magnitude up to 103 cm2 V−1 s−1, as high as electron mobility. The strained few-layer InSe are thus a promising candidate for future 2D electronic and optoelectronic nano-devices.

Graphical abstract: Enhancement of photoluminescence and hole mobility in 1- to 5-layer InSe due to the top valence-band inversion: strain effect

Supplementary files

Article information

Article type
Paper
Submitted
18 Apr 2018
Accepted
11 May 2018
First published
16 May 2018

Nanoscale, 2018,10, 11441-11451

Enhancement of photoluminescence and hole mobility in 1- to 5-layer InSe due to the top valence-band inversion: strain effect

M. Wu, J. Shi, M. Zhang, Y. Ding, H. Wang, Y. Cen and J. Lu, Nanoscale, 2018, 10, 11441 DOI: 10.1039/C8NR03172J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements