Issue 16, 2019

A modified “gel-blowing” strategy toward the one-step mass production of a 3D N-doped carbon nanosheet@carbon nanotube hybrid network for supercapacitors

Abstract

In this work, we have realized the synchronous and large-scale synthesis of one-dimensional (1D) carbon nanotubes (CNTs) on two-dimensional (2D) N-doped carbon nanosheets (NCNS) by a one-step annealing of a Ni-containing gel precursor. Upon heating, the gel is “blown” into large-sized 2D NCNS with uniformly embedded Ni nanoparticles that can catalyze the in situ CNT growth, forming a three-dimensional (3D) N-doped carbon nanosheet@carbon nanotube (NCNS@CNT) hybrid. Different from our previous “gel-blowing” strategy for 2D nanosheets, the modified “gel-blowing” strategy is capable of producing 3D architecture by employing a new complexing agent and introducing ethanol as a carbon source. Importantly, this method can be easily scaled up by annealing more gel precursors with an increased amount of ethanol. The introduction of CNTs endows NCNS@CNTs with higher quality and larger specific surface area (SSA) than pure NCNS. Consequently, the electrochemical performance of 3D NCNS@CNTs is much superior to that of 2D NCNS and found to be related with the annealing temperature. The optimized NCNS@CNTs can deliver a specific capacitance of 124 F g−1 at 1 A g−1 and maintain 88% of their initial value after 10 000 cycles at 1 A g−1. Furthermore, NiO nanosheets are deposited on the NCNS@CNT framework to study its function as a conductive host. The as-fabricated hybrid electrode exhibits a high specific capacitance of 660 F g−1 at 1 A g−1 and 532 F g−1 at 20 A g−1, which is also better than its counterpart using NCNS as substrates. This method provides a simplified and low-cost way towards the mass production of NCNS@CNTs for energy application and beyond.

Graphical abstract: A modified “gel-blowing” strategy toward the one-step mass production of a 3D N-doped carbon nanosheet@carbon nanotube hybrid network for supercapacitors

Supplementary files

Article information

Article type
Paper
Submitted
22 Dec 2018
Accepted
30 Jan 2019
First published
31 Jan 2019

Nanoscale, 2019,11, 7624-7633

A modified “gel-blowing” strategy toward the one-step mass production of a 3D N-doped carbon nanosheet@carbon nanotube hybrid network for supercapacitors

W. Zhou, Y. Du, J. Zeng, F. Liu and Y. Zhu, Nanoscale, 2019, 11, 7624 DOI: 10.1039/C8NR10348H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements