Issue 16, 2018

Heterogeneous phosphorus-doped WO3−x/nitrogen-doped carbon nanowires with high rate and long life for advanced lithium-ion capacitors

Abstract

Hybrid lithium-ion capacitors (LICs) are promising energy storage systems which could deliver higher energy density without compromising the high power and cycle life of supercapacitors. WO3 is an appealing anode material for LICs due to its high theoretical capacity of 696 mA h g−1 for Li+ storage. However, the practical implementation of WO3 in LICs is limited by its low conductivity, sluggish kinetics and large volume changes during cycles. Herein, we report a “hitting three birds with one stone” strategy for the synthesis of heterogeneous phosphorus-doped WO3−x/N-doped carbon (P-WO3−x/NC) nanowires, which are prepared via the calcination of organic–inorganic hybrid WO3/ethylenediamine(EDA) nanowires in Ar and subsequent thermal phosphorization. The EDA molecules are carbonized into a 1D NC matrix and WO3 layers are converted into P-WO3−x nanocrystals which are in situ embedded in the continuous 1D NC matrix forming a well-defined 0D-in-1D hybrid structure. The small P-WO3−x nanocrystals offer short paths for Li+ diffusion and the continuous NC matrix facilitates electron transport and buffers the volume change of P-WO3−x during discharging/charging. The oxygen vacancies and P heteroatoms with smaller electronegativity result in enhanced electrochemical activity due to the higher degree of covalent bonding and sharing electrons. The P-WO3−x/NC nanowires are expected to act as high-performance anodes for LICs with high capacity, high rate and long life via the synergistic effect of P dopants and oxygen vacancies as well as the in situ formed conductive carbon matrix. Our results show that the P-WO3−x/NC nanowire electrode delivers a high capacity of 490 mA h g−1 at 1 A g−1 and a high rate capacity of 230 mA h g−1 at 3.2 A g−1. Moreover, the P-WO3−x/NC nanowires exhibit excellent cycle reversibility with 96.2% capacity retention over 2000 cycles at 1 A g−1. A 4.3 V LIC prototype composed of the P-WO3−x/NC anode with a commercial activated carbon cathode shows an ultra-high energy density of 195.58 W h kg−1 at 597.2 W kg−1 with 90.7% retention over 6000 cycles. These promising results provide fundamental insight into the synthesis of high-performance electrode materials for advanced electrochemical energy storage.

Graphical abstract: Heterogeneous phosphorus-doped WO3−x/nitrogen-doped carbon nanowires with high rate and long life for advanced lithium-ion capacitors

Supplementary files

Article information

Article type
Paper
Submitted
20 Jan 2018
Accepted
16 Mar 2018
First published
16 Mar 2018

J. Mater. Chem. A, 2018,6, 6916-6921

Heterogeneous phosphorus-doped WO3−x/nitrogen-doped carbon nanowires with high rate and long life for advanced lithium-ion capacitors

J. Xu, Z. Liao, J. Zhang, B. Gao, P. K. Chu and K. Huo, J. Mater. Chem. A, 2018, 6, 6916 DOI: 10.1039/C8TA00639C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements