Issue 17, 2019

Reliable and reusable whole polypropylene plastic microfluidic devices for a rapid, low-cost antimicrobial susceptibility test

Abstract

Using an antimicrobial susceptibility test (AST) as an example, this work demonstrates a practical method to fabricate microfluidic chips entirely from polypropylene (PP) and the benefits for potential commercial use. Primarily caused by the misuse and abuse of antibiotics, antimicrobial resistance (AMR) is a major threat to modern medicine. The AST is a promising technique to help with the optimal use of antibiotics for reducing AMR. However, current phenotypic ASTs suffer from long turnaround time, while genotypic ASTs suffer from low reliability, and both are unaffordable for routine use. New microfluidics based AST methods are rapid but still unreliable as well as costly due to the PDMS chip material. Herein, we demonstrate a convenient method to fabricate whole PP microfluidic chips with high resolution and fidelity. Unlike PDMS chips, the whole PP chips showed better reliability due to their inertness; they are solvent-compatible and can be conveniently reused and recycled, which largely decreases the cost, and are environmentally friendly. We specially designed 3D chambers that allow for quick cell loading without valving/liquid exchange; this new hydrodynamic design satisfies the shear stress requirement for on-chip bacterial culture, which, compared to reported designs for similar purposes, allows for a simpler, more rapid, and high-throughput operation. Our system allows for reliable tracking of individual cells and acquisition of AST results within 1–3 hours, which is among the group of fastest phenotypic methods. The PP chips are more reliable and affordable than PDMS chips, providing a practical solution to improve current culture-based AST and benefiting the fight against AMR through helping doctors prescribe effective, narrow-spectrum antibiotics; they will also be broadly useful for other applications wherein a reliable, solvent-resistant, anti-fouling, and affordable microfluidic chip is needed.

Graphical abstract: Reliable and reusable whole polypropylene plastic microfluidic devices for a rapid, low-cost antimicrobial susceptibility test

Supplementary files

Article information

Article type
Paper
Submitted
27 May 2019
Accepted
23 Jul 2019
First published
23 Jul 2019

Lab Chip, 2019,19, 2915-2924

Reliable and reusable whole polypropylene plastic microfluidic devices for a rapid, low-cost antimicrobial susceptibility test

H. Sun, C. Chan, Y. Wang, X. Yao, X. Mu, X. Lu, J. Zhou, Z. Cai and K. Ren, Lab Chip, 2019, 19, 2915 DOI: 10.1039/C9LC00502A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements