Issue 31, 2019

Suppressing detrimental phase transitions via tungsten doping of LiNiO2 cathode for next-generation lithium-ion batteries

Abstract

A series of W-doped (1.0, 1.5, and 2.0 mol%) LiNiO2 cathodes was synthesized to systematically investigate the stabilization effect of W doping. The 2 mol% W-LiNiO2 cathode delivered 195.6 mA h g−1 even after 100 cycles at 0.5C, which was 95.5% of its initial capacity. The capacity retention of LiNiO2 cycled under the same conditions was 73.7%. In situ X-ray diffraction analysis of the cathodes during charging showed that the W doping protracted the deleterious phase transition to the extent that the two-phase reaction (H2 → H3) merged into a single phase; thus, the phase transition proceeded through a solid-solution-like reaction. The significantly enhanced cycling stability due to W doping largely originated from the reduction of the structural stress associated with the repetitive phase transition caused by the reduction of the abrupt lattice collapse/expansion. The effect of the reduced lattice distortion together with the W-rich surface phase and cation ordering greatly stabilized the LiNiO2 structure during cycling, making W-doped LiNiO2 a candidate material for practical high-energy density cathodes.

Graphical abstract: Suppressing detrimental phase transitions via tungsten doping of LiNiO2 cathode for next-generation lithium-ion batteries

Supplementary files

Article information

Article type
Paper
Submitted
15 Jun 2019
Accepted
15 Jul 2019
First published
24 Jul 2019

J. Mater. Chem. A, 2019,7, 18580-18588

Suppressing detrimental phase transitions via tungsten doping of LiNiO2 cathode for next-generation lithium-ion batteries

H. Ryu, G. Park, C. S. Yoon and Y. Sun, J. Mater. Chem. A, 2019, 7, 18580 DOI: 10.1039/C9TA06402H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements