Issue 11, 2020

Self-supported binder-free hard carbon electrodes for sodium-ion batteries: insights into their sodium storage mechanisms

Abstract

Hard carbons are some of the most promising negative electrode materials for sodium-ion batteries (NIBs). In contrast to most of the published studies employing powder-like electrodes containing binders, additives and solvents, we report herein an innovative way to prepare binder-free electrodes by simple impregnation of cellulose and cotton filter papers with a phenolic resin solution. The latter enables improvement of the poor mechanical properties and thermal stability observed for pristine hard carbon self-standing electrodes (SSEs) along with the carbon yield. A high reversible specific capacity and long-term stability were observed for cellulose compared to those of cotton-based SSEs in NIBs, i.e., 240 mA h g−1vs. 140 mA h g−1, respectively, for a C/10 rate and high mass loading (∼5.2 mg cm−2). This could be ascribed to the larger number of defects on cellulose than on cotton as quantified by temperature programmed desorption coupled with mass-spectrometry (TPD-MS), the structure and porosity being similar for both materials. Furthermore, the addition of a conductive sputter coating on the cellulose SSE surface improved the reversible specific capacity (to ∼300 mA h g−1) and initial coulombic efficiency (ICE) (to 85%). Operando X-ray diffraction (XRD) was performed to provide additional insights into the Na storage mechanisms. Although no shift was noticed for the graphite (002) diffraction peak, clear evidence of sodium intercalation was observed in the plateau region with the appearance of a new diffraction peak (∼28.0° 2θ) likely associated with a sodium intercalation compound. Consequently, the sloping region could be related to the Na+ adsorption on hard carbon defects and pores.

Graphical abstract: Self-supported binder-free hard carbon electrodes for sodium-ion batteries: insights into their sodium storage mechanisms

Supplementary files

Article information

Article type
Paper
Submitted
02 Dec 2019
Accepted
15 Feb 2020
First published
17 Feb 2020

J. Mater. Chem. A, 2020,8, 5558-5571

Self-supported binder-free hard carbon electrodes for sodium-ion batteries: insights into their sodium storage mechanisms

A. Beda, C. Villevieille, P. Taberna, P. Simon and C. Matei Ghimbeu, J. Mater. Chem. A, 2020, 8, 5558 DOI: 10.1039/C9TA13189B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements