Issue 12, 2021

Direct analysis of tellurium solid samples with a two-jet arc plasma using electrothermal vaporization

Abstract

The combination of two-jet arc plasma optical emission spectrometry (TJP-OES) and electrothermal vaporization (ETV) for sample introduction is proposed for the first time. The direct analysis of solid tellurium samples by ETV-TJP-OES is described. The temperature program of ETV enabled the evaporation of the sample matrix (tellurium) and analytes separately. The separate vaporization of the sample matrix and analytes reduced interference, which ensured lower limits of detection of the technique (LODs). The proposed ETV-TJP-OES technique allowed the simultaneous determination of up to 17 elements in a high-purity tellurium sample with LODs ranging from 0.02 to 50 ng g−1. The LODs of Al, Au, Ba, Be, Cr, Mg, Mn, Ni, Pb, Re, Sr and Zn provided by ETV-TJP-OES are 2 to 50 times lower compared with inductively coupled plasma optical emission spectrometry (ICP OES) after sample decomposition and analysis using pneumatic nebulization for sample introduction into the ICP. The accuracy of the proposed technique was confirmed by the analysis of tellurium samples by ICP-OES and by analyte (spike) recovery tests.

Graphical abstract: Direct analysis of tellurium solid samples with a two-jet arc plasma using electrothermal vaporization

Article information

Article type
Paper
Submitted
12 Aug 2021
Accepted
13 Oct 2021
First published
31 Oct 2021

J. Anal. At. Spectrom., 2021,36, 2669-2674

Direct analysis of tellurium solid samples with a two-jet arc plasma using electrothermal vaporization

A. V. Kuptsov, N. S. Medvedev, O. V. Lundovskaya, A. I. Saprykin and V. A. Labusov, J. Anal. At. Spectrom., 2021, 36, 2669 DOI: 10.1039/D1JA00286D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements