Issue 46, 2022

MXene-driven in situ construction of hollow core-shelled Co3V2O8@Ti3C2Tx nanospheres for high-performance all-solid-state asymmetric supercapacitors

Abstract

Ti3C2Tx MXene-wrapped hollow Co3V2O8 nanospheres were simply prepared by using the pre-prepared Ti3C2Tx nanoflakes as the nucleation site and precursor to promote the uniform growth of hollow Co3V2O8 nanospheres as well as to achieve in situ encapsulation. Profiting from the specific interface coupling and hollow architecture, the unique core-shelled Co3V2O8@Ti3C2Tx presented outstanding capacitive performances in terms of large specific capacitance, fine rate capability, and long-term cycle life. In particular, its capacitance as high as 94.5% could be maintained upon 10 000 cycles even at a high current density of 80 mA cm−2 (∼10 A g−1). The as-fabricated solid-state asymmetric supercapacitor assembled by Co3V2O8@Ti3C2Tx and active carbon could output an energy density of 70.2 μW h cm−2 at a power density of 3.3 mW cm−2 with 87.1% of the initial capacity retained after 10 000 cycles, outperforming many similar electrode materials in previous reports. In view of the remarkable performances and facile preparation, Co3V2O8@Ti3C2Tx holds good prospective application potential as a promising cathode candidate for supercapacitors.

Graphical abstract: MXene-driven in situ construction of hollow core-shelled Co3V2O8@Ti3C2Tx nanospheres for high-performance all-solid-state asymmetric supercapacitors

Supplementary files

Article information

Article type
Paper
Submitted
19 Aug 2022
Accepted
17 Oct 2022
First published
18 Oct 2022

J. Mater. Chem. A, 2022,10, 24896-24904

MXene-driven in situ construction of hollow core-shelled Co3V2O8@Ti3C2Tx nanospheres for high-performance all-solid-state asymmetric supercapacitors

J. Zhou, B. Liu, L. Zhang, Q. Li, C. Xu and H. Liu, J. Mater. Chem. A, 2022, 10, 24896 DOI: 10.1039/D2TA06579G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements